BSW Self Cleaning Gravity Strainer

For fiber containing waters and fresh water cleaning.

BSW Gravity Strainer operate by feeding unfiltered liquid through a tangential inlet into a chamber between the outer strainer housing and an internal vessel. The internal vessel incrorporates a filter screen that is recessed into the vessel. The liquid runs up and over the edges of the internal vessel and down onto the secreen. Unwanted  solids are blocked by the screen and clean fluids run through the screen and exit in a novel way. The two spray bars positioned below the screen rotate continuously, completing a revolution every 2 - 6 seconds- A small quantity of spary water lifts and flushes solids from the surface of the screen. The spray bars rotate in line with the unique collection chambers located directly above the screen. These collection chambers are sloped towards a reject pipe in the middle of the vessel. Here the dirt particles are collected and removed to the reject line. This way the BSW is cleaning itself automatically and continuously.

BSW Brochure

 

BSW gravity stariner
 
 
 
See the BSW in action: This is a show demo unit, in front with a plexi glass, in the back with the mesh element. The nozzles lift the dirt from the surface and are collected in the upper part of the moving arm.